6061 Coated Aluminum Sheet
The main elements of 6061 coated aluminum sheet are magnesium and silicon and form the Mg2Si. If it contains a certain amount of manganese and chromium, it can neutralize the bad effect of iron. Sometimes it also can be added a small amount of copper or zinc to...
6061 coated aluminum sheet
The main elements of 6061 coated aluminum sheet are magnesium and silicon and form the Mg2Si. If it contains a certain amount of manganese and chromium, it can neutralize the bad effect of iron. Sometimes it also can be added a small amount of copper or zinc to increase the strength of the alloy without significantly reducing its corrosion resistance.
Usually, 6061 coated aluminum sheet produced by Mirach Coating in the high sales of aluminum alloy materials, because its performance is basically consistent with the various mechanical processing, equipment processing.
► Capacity & Availability
✔ 6061 O/T4/T6/T651
✔ Length for 6061 coated aluminum sheet: max. 7000 mm
✔ Surface: embossed, mill finish, coated
✔ Thickness: 0.08~6.0 mm (normally 1.0~3.0 mm, tolerance ±3%)
✔ Paint thickness: PE painting≥18mic; PVDF≥25mic; premier≥5mic, tolerance ±0.002 mm
✔ Coating brand: Normally PPG and Beckers
✔ Coated colors: RAL, NCS, Pantone etc. or on request
✔ Color standard for 6061 coated aluminum sheet: E < 2 or it is not obvious by eyeballing
✔ Coating adhesive: not lower than first grade Impact
► Typical Mechanical Data
Tensile Strength (ksi)
Yield Strength (ksi)
► Features & Applications
Mg and Si are added to 6061 aluminum sheet, thus, it has middle strength and good resistance to correction. Besides, 6061 aluminum sheet/coil probably the most commonly available, heat treatable aluminum alloy. 6061 aluminum sheet/coil can be easily cold worked and formed in the annealed condition.
Uses include engineering and structural applications, boats, furniture and transportation equipment.
► Adopted Standards
YS/T429.2-2000, ASTM-B-209M, BS EN 485-2, BS EN 573-3, GB/T3880-2008
► Ordering & Packing
✔ MOQ for 6061 coated aluminum sheet: 5 MT per spec
✔ Essential info for inquiry: alloy & temper, required sizes, coating color, end usage
✔ Packing for coated al sheet: protection and wooden pallets with fumigation for seaworthy