What Chemical Composition Does The Colored Aluminum Coil Contain?
- Dec 03, 2018 -

图片5 

Color coated aluminum coil is a plate type material supported by aluminum or aluminum alloy material.

It is also possible to understand that the color coated aluminum coil is made of flat aluminum embryo by heating, rolling and straightening or solidification aging heat and other processes made of plate-type aluminum products. Color coated aluminum coil is a plate type material supported by aluminum or aluminum alloy material. So what chemical composition does the colored aluminum coil contain?

The following describes:

First, it can contain up to 0.2% zirconium and titanium.

Second, the element nature of the combination is expressed as a maximum percentage, unless a range or minimum value is listed.

Third, in order to set the appropriate numerical limits, the observed or calculated values are based on the Standard Rules ANSI Z25.1 to indicate a clear range.

Forth, The content of aluminum in non-alloy aluminum, which is not refined by refining process, is the difference between the total amount of other metals and the percentage of pure aluminum-the difference is 0.01 or a little more.

Lastly, The second place after the decimal point of the percent ratio. with the exception of non-alloys, the amount specified in the elements in the alloy is usually indicated in the analysis report.

However, if other elements are suspected to exist or some elements are suspected to be excessive in the course of the analysis, further analysis should be made until proven.


    Contact Us
  • +86-23-67025810
  • info@mirachcoatedal.com
  • No.6/F14, Bldg. 9, North Bank Sun Town St. No.1, Jiangbei Dist., Chongqing, China
    JOIN US